CONTROL ARMS
Track control and wishbone arms connect the knuckle (wheel) to the chassis or sub frame. They make the independent movement of the suspension of each wheel possible. They make steering solid and sturdy by stabilising the wheel and reduce vibration and uncontrolled movements whilst driving.


Top quality & highly durable Control Arms by MOOG®
Key Product Features
Going the extra mile for durable control and comfort
Our track control and wishbone arms are made using a variety of different materials depending on the application, for example forged or cast steel, or forged or cast aluminum and sheet metal.
Every single component in a control arm not only has to be extremely durable and resistant to corrosion and wear, they also must deliver a smooth and comfortable driving experience. The innovations in our range of control arms are designed to ensure that they possess these very properties. To improve safety, the studs are induction hardened for strength and durability, while their hybrid core carbon fibre bearings reduce the increase in radial deflection by 40% on average. Our zinc flake coating on accessories is far more corrosion-resistant than common phosphate coatings and have an improved appearance. Fitting the control arm ball joint is far easier thanks to the use of synthetic grease which also improves driving comfort and durability. The steel used for our sheet metal arms is over 200% stronger, while our aluminium arms are sand blasted which not only gives an improved appearance, but also prevents cracks which enhances safety.
When it comes to total control, we’re sure it pays to go the extra mile.
FACT: MOOG was the first brand to introduce cataphoresis coating on all sheet metal wishbone and control arms. The advanced cataphoresis electrostatic coating better withstands exposure to severe road conditions such as water, snow, stones and gravel.
Quick-Look Benefits
DURABLE
Stronger steel and improved radial deflection
SAFE
Induction hardened studs and sand blasting
COMFORTABLE
New synthetic grease and hybrid core technology
Lower-grade steel and/or the wrong heat treatment can be cheaper but also reduce the lifetime of the part by up to 50%. Robbie de Moor - Senior Product Manager
Engine | MotNr | Fuel Type | Bore | Stroke | Cylinders | CC | kW/PS | Aspiration | Valves |
---|---|---|---|---|---|---|---|---|---|
{{ engine.make }} {{ engine.code }} | {{ engine.tecdoc_id || "-" }} | {{ engine.fuel_type || "-" }} | {{ formatPreciseValue(engine.bore) || "-" }}mm | {{ formatPreciseValue(engine.stroke) || "-" }}mm | {{ engine.cylinder_count || "-" }} | {{ maxAndMin(engine.cc_tech_range) || "-" }} | {{ maxAndMin(engine.kw_range) || "-" }} / {{ maxAndMin(engine.hp_range) || "-" }} | {{ engine.aspiration_type || "-" }} | {{ engine.valve_count || "-" }} |
Part Finder
Engine MotNr Fuel Type Bore Stroke Cylinders CC kW/PS Aspiration Valves {{ engine.make }} {{ engine.code }} {{ engine.tecdoc_id || "-" }} {{ engine.fuel_type || "-" }} {{ formatPreciseValue(engine.bore) || "-" }}mm {{ formatPreciseValue(engine.stroke) || "-" }}mm {{ engine.cylinder_count || "-" }} {{ maxAndMin(engine.cc_tech_range) || "-" }} {{ maxAndMin(engine.kw_range) || "-" }} / {{ maxAndMin(engine.hp_range) || "-" }} {{ engine.aspiration_type || "-" }} {{ engine.valve_count || "-" }} Axle tabYour Vehicle
-
Your Engine
Engine MotNr Fuel Type Bore Stroke Cylinders CC kW/PS Aspiration Valves {{ engine.make }} {{ engine.code }} {{ engine.tecdoc_id || "-" }} {{ engine.fuel_type || "-" }} {{ formatPreciseValue(engine.bore) || "-" }}mm {{ formatPreciseValue(engine.stroke) || "-" }}mm {{ engine.cylinder_count || "-" }} {{ maxAndMin(engine.cc_tech_range) || "-" }} {{ maxAndMin(engine.kw_range) || "-" }} / {{ maxAndMin(engine.hp_range) || "-" }} {{ engine.aspiration_type || "-" }} {{ engine.valve_count || "-" }} -
Your Part
Hybrid Core Technology
Through the use of carbon fibre reinforcement, MOOG's Hybrid Core Technology significantly increases the bearing durability of MOOG’s control arms, ball joints, tie rod ends and axial rods.
Ball Joints Housing Coating
Both our press-in and bolted ball joints have new housing coatings which improve their appearance and resistance to corrosion.
Zinc flake coated and flanged nuts and bolts
Corrosion-resistance and increased locking force
Synthetic Grease
Using new synthetic grease improves driving comfort, and also makes fitting far easier for you.

TECHNICAL SUPPORT TOOLS
FOR TECHNICIANS
We have created world-class online technical training courses, instructional videos, technical articles and expert interviews. Whether you’re a mechanic, garage owner or supplier, Garage Gurus will help you find what you need to succeed. If you have questions, we have the answers.
DISCOVER THE RANGE
MOOG offers a total Steering & Suspension solution for vehicles backed-up with a 3-year warranty.
